{"id":26,"date":"2006-04-04T08:06:14","date_gmt":"2006-04-04T13:06:14","guid":{"rendered":"http:\/\/www.tigoe.com\/pcomp\/code2\/arduinowiring\/26"},"modified":"2007-10-04T12:24:42","modified_gmt":"2007-10-04T17:24:42","slug":"arduino-shields-for-prototyping","status":"publish","type":"post","link":"https:\/\/www.tigoe.com\/pcomp\/code\/arduinowiring\/26\/","title":{"rendered":"Arduino Shields for Prototyping"},"content":{"rendered":"

Below are two designs for Arduino<\/a> prototyping shields<\/a>. They’re designed as generic boards on which you can develop any small circuit to connect to the Arduino board. One has a breadboard mounted on it, and the other has a simple PCB grid of holes.<\/p>\n

Both of these are based on David Cuartielles’ shield design.<\/p>\n

<\/p>\n

Breadboard shield<\/strong><\/p>\n

This shield has the reset button, the ICSP header, the I\/O and power pin headers, and a small breadboard for prototyping. It also has two bus rows, one for 5V and one for ground.<\/p>\n

<\/center>
<\/center>Part list:<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
Part<\/th>\nDesc<\/th>\nPackage<\/th>\nPart No<\/th>\n<\/tr>\n
ICSP<\/td>\n2×3 header<\/td>\n2X03<\/td>\nSamtec<\/a> SSA-103-W-T (Qty. 2)<\/td>\n<\/tr>\n
unlabeled<\/td>\n1×17 female header (the two rows beside the breadboard)<\/td>\n1×17<\/td>\nDigikey<\/a> 929974-01-32-ND (Qty 2)<\/td>\n<\/tr>\n
J1<\/td>\n1×8 header<\/td>\n1X08<\/td>\nSamtec<\/a> SSA-108-W-T<\/td>\n<\/tr>\n
J2<\/td>\n1×6 header<\/td>\n1X06<\/td>\nSamtec<\/a> SSA-106-W-T<\/td>\n<\/tr>\n
J3<\/td>\n1×8 header<\/td>\n1X08<\/td>\nSamtec<\/a> SSA-108-W-T<\/td>\n<\/tr>\n
POWER<\/td>\n1×4 header<\/td>\n1X04<\/td>\nSamtec<\/a> SSA-104-W-T<\/td>\n<\/tr>\n
R1<\/td>\n10K Resistor<\/td>\n0207\/10<\/td>\nDigikey<\/a> 10KQBK-ND<\/td>\n<\/tr>\n
R7<\/td>\n1K Resistor<\/td>\n0207\/10<\/td>\nDigikey<\/a> 1.0KQBK-ND<\/td>\n<\/tr>\n
S1<\/td>\nmomentary switch<\/td>\nB3F-10XX<\/td>\nDigikey<\/a> SW400-ND<\/td>\n<\/tr>\n
Breadboard<\/td>\nSolderless breadboard<\/td>\n <\/td>\nDigikey<\/a> 923273-ND<\/td>\n<\/tr>\n<\/table>\n

A note on the Samtec headers: you can also buy long strips of these headers, because the strips can be broken into smaller pieces. You need 49 pins total, so two of part number SSA-125-W-T would do it. (the “125” indicates that they’re a single row, 25 pins).<\/p>\n

Arduino Breadboard shield Eagle files<\/a>
\nArduino Breadboard Shield Gerber Files<\/a><\/p>\n

Perfboard shield<\/strong><\/p>\n

Same as the breadboard shield, but with a grid of vias for perfboard prototyping. It also has a 5V bus and a ground bus. IT also has two LEDs which can be connected to any pin via jumper holes next to the LED.<\/p>\n

<\/center>Part list:<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
Part<\/th>\nDesc<\/th>\nPackage<\/th>\nDigikey Part No<\/th>\n<\/tr>\n
ICSP<\/td>\n2×3 header<\/td>\n2X03<\/td>\nSamtec<\/a> SSA-103-W-T (Qty. 2)<\/td>\n<\/tr>\n
J1<\/td>\n1×8 header<\/td>\n1X08<\/td>\nSamtec<\/a> SSA-108-W-T<\/td>\n<\/tr>\n
J2<\/td>\n1×6 header<\/td>\n1X06<\/td>\nSamtec<\/a> SSA-106-W-T<\/td>\n<\/tr>\n
J3<\/td>\n1×8 header<\/td>\n1X08<\/td>\nSamtec<\/a> SSA-108-W-T<\/td>\n<\/tr>\n
POWER<\/td>\n1×4 header<\/td>\n1X04<\/td>\nSamtec<\/a> SSA-104-W-T<\/td>\n<\/tr>\n
R1<\/td>\n10K Resistor<\/td>\n0207\/10<\/td>\nDigikey<\/a> 10KQBK-ND<\/td>\n<\/tr>\n
R7<\/td>\n1K Resistor<\/td>\n0207\/10<\/td>\nDigikey<\/a> 1.0KQBK-ND<\/td>\n<\/tr>\n
S1<\/td>\nmomentary switch<\/td>\nB3F-10XX<\/td>\nDigikey<\/a> SW400-ND<\/td>\n<\/tr>\n
LED1<\/td>\n3mm LED<\/td>\nLED3MM<\/td>\nDigikey<\/a> 160-1144-ND<\/td>\n<\/tr>\n
LED2<\/td>\n3mm LED<\/td>\nLED3MM<\/td>\nDigikey<\/a>160-1144-ND<\/td>\n<\/tr>\n<\/table>\n

Arduino Perfboard shield Eagle Files
\n<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Below are two designs for Arduino<\/a> prototyping shields<\/a>. They’re designed as generic boards on which you can develop any small circuit to connect to the Arduino board. One has a breadboard mounted on it, and the other has a simple PCB grid of holes.<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[9],"tags":[],"class_list":["post-26","post","type-post","status-publish","format-standard","hentry","category-arduinowiring"],"_links":{"self":[{"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/posts\/26","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/comments?post=26"}],"version-history":[{"count":0,"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/posts\/26\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/media?parent=26"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/categories?post=26"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tigoe.com\/pcomp\/code\/wp-json\/wp\/v2\/tags?post=26"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}